DIOLINE 20 Ethernet/IP Bus Coupler

• Fieldbus: Ethernet/IP Adapter
• 2x Ethernet M12 d-coded connectors
• L-Bus Master Interface for connection of local I/O modules
• RS232 Interface for diagnostic
• static or dynamic addressing through DHCP
• Power supply DC 24 V

PDF DIOLINE 20 Ethernet/IP Bus Coupler

DIOLINE PLC MVB/CAN/RS485

• Flexible powerful compact control unit
• Programmable in a comfortable IEC 61131-3 development environment
• 4 fieldbus-interfaces: MVB, CAN, RS485 and L-Bus
• Ethernet M12 d-coded and R232 Interface for diagnostic and programming purposes
• Visualisation Interface over OPC
• Power supply DC 24 V

PDF DIOLINE PLC MVB/CAN/RS485

DIOLINE 20 L-Bus DO6 110V

• L-Bus expansion module with 6 digital outputs
• Output voltage range: DC 24 V… 110 V
• Output current: max. 2 A per channel
• 3 potential groups
• Channel type: N-MOS FET
• Extended module diagnostics (2 bit per output)
• Optional available with diodes (for redundant use)

PDF DIOLINE 20 L-Bus DO6 110 V

DIOLINE 20 Redundant I/O

• 2 I/O expansion modules for redundancy operations internally connected
• Saves wiring and installation effort
• Available in following variants: 2x 16DI, 2x 16DO, 2x 8DI/8DO, 2x 8DO 24 V with extended diagnostics

PDF DIOLINE 20 Redundant I/O

Relay Modules with gas-filled relays

• Relay hermetically sealed
• 4 C/O contacts forcibly-guided
• High contact life time on inductive loads
• Relay compliant with NF F 62-002-2 FPn°9
• Spring clamp terminals plugable
• Coil voltage: DC 24 V / DC 36 V / DC 72 V / DC 110 V

PDF Relay Modules with gas-filled relays

MICROCOMPACT housings comply with current fire & smoke standards

• Flammability rating V0 acc. to UL94
• Limited Oxygen Index LOI >30 %
• Smoke index acc. to NF F 16-101: F2
• Fire behaviour acc. to NF F 16-101: I2 alternatively M1

PDF MICROCOMPACT housings comply with current fire & smoke standards

Time Relay programmable

• Time / function programmed by the manufacturer
• No operating elements, no danger of manipulation
• Wide range supply voltage DC 24 V - 110 V
• Wide range control input DC 24 V - 110 V
• 2 C/O contacts

PDF Time Relay programmable

Twilight Switch

• Automatic switching of the interior lights subject to the light intensity (e.g. tunnel entrance)
• Threshold level „dark“ 10 Lux , threshold level „bright“ 20 Lux
• Threshold levels can be adjusted via two integrated potentiometers
• Light sensor: light dependent resistor (LDR)
• Switching output 24 V / 0,5 A short circuit protected
• Supply voltage DC 24 V

PDF Twilight Switch

LED-Lighting Elements

• Ultra bright high power LED white
• Long liftetime
• Integrated dimmer switch
• Protection degree IP40 or IP67
• Extruded Aluminium sheath
• Supply voltage DC 24 V - 36 V

PDF LED-Lighting Elements

Audio Transducer

• Playback of voice and music
• Programmed by the manufacturer
• Supported audio formats: *.wav and *.mp3
• 6 wide range control inputs DC 24 V - 110 V
• Wide range power supply DC 24 V - 110 V

PDF Audio Transducer

LÜTZE is IRIS 02 certified

In 2010, LÜTZE was among the first 25 companies worldwide to obtain the new Railway Industry Standard IRIS 02 certification.

The new IRIS Revision 02 goes significantly further than the requirements of the ISO 9001 standard and incorporates additional railway-specific requirements.

Download Certificate

New timing relay

Time is money!

Easy to configure multifunction timing relay from.

suissetraffic 2013 at the UITP World Congress from 27 to 29 May 2013 in Genev

Hall 2, Stand 2B 130

For more information
click here.